data brief for further information contact your local stmicroelectronics sales office. october 2010 doc id 18073 rev 1 1/3 3 sbx-socketboard universal socket boards for st microcontrollers features the programming socket is designed to hold a specific mcu package. the routing card provides the specific signal routing required for programming your target mcu. routing cards are provided for all supported mcus. the icc, swim or jtag connectors on the board are used to connect to your programming tool. the programming tool then serves as the hardware interface with your host pc. the sbx-socketboard is delivered with: ? one socket for a specific mcu package (depending on the type of board that you ordered) ? routing cards for all the microcontrollers supported by the socket board ? one power supply description the sbx universal socket b oards complement all programming tools that are equipped for in-circuit programming (icp) via icc, swim, or jtag. for these programming tools and emulators, the socket boards provide the sockets required to program any st 8 or 32-bit flash microcontroller without having to install it on an application board. universal socket boards are available for different types of package, and different types of connectors (icc, swim or jtag). the sbx universal socket boards are intended to program small numbers of microcontrollers (for example, prototypes in the development stage). for mass production programming, we recommend using the appropriate gang or automated programmer. table 1. device summary part number reference sbx-socketboard universal socket boards for st microcontrollers. these are not recommended for new designs. www.st.com
sbx-socketboard 2/3 doc id 18073 rev 1 revision history table 2. document revision history date revision changes 28-oct-2010 1 initial release.
sbx-socketboard doc id 18073 rev 1 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
